





                                     WIPE 3.5

          Wipe is a MAX TOOL used to modify the configuration register  and
          erase or alter the EEPROM memory of 68HC11 MPU's.

          Stop  now  and  make  copies of the distribution disk so you will
          have backup copies.   The program  should  be  self  explanatory,
          through menu's and prompts.  The program is invoked by " WIPE35".

          Basic  operation  involves  placing the 68HC11 to be 'WIPED' into
          SPECIAL BOOTSTRAP MODE, performing the WIPE operation, and return-
          ing to normal operation.   These steps are prompted by  the  menu
          during the WIPE35 program execution.

          Notes:
               68HC11 Special Bootstrap Mode -
                         Mode A pin = Ground.
                         Mode B pin = Ground.

               Reset - Reset pin held at ground level momentarily.

          FOR QUESTIONS OR HELP CALL -
                    NEW MICROS  (214) 339-2204

          *** WARNING: DO NOT run WIPE35 with the WINDOWS on the backgound.
		     You must Exit out of WINDOWS, then run WIPE35. Other-
		     wise  MPU will not responding due to the WINDOWS 
                     communication line problem.(9/23/94)



























                                          1
